Quick answer
Biofilm is a slimy layer of microorganisms that sticks to wet surfaces, especially inside plumbing, where you cannot easily see it. The most common signs are slick or slimy surfaces, water that smells off, cloudy water or floating flakes, and a sanitizer level that will not hold even though you keep adding more. No single sign proves it, but several together point strongly to biofilm.
Signs to look for
- Slimy or slippery feel on the shell below the waterline, on the filter, or inside the skimmer.
- Musty, sour or “swampy” smell, especially when the jets first start.
- Cloudy water that keeps returning, even after you correct the chemistry.
- Flakes or stringy bits floating in the water, particularly after the jets run.
- Sanitizer that disappears quickly. If you need more chlorine or bromine than before to hold the same reading, something is consuming it. Biofilm is one possible cause.
- Foam that returns. See foamy hot tub water.
- Skin irritation or rash after soaking (see the health note below).
Where to look
- Run a fingertip along the waterline and just below it. A slick, soft film that wipes away is a clue.
- Pull the filter and check the housing. Slime in or around it is common.
- Look into the skimmer and around the jet openings with a flashlight.
- Notice what comes out when the tub drains. Dark flecks, slime or “gunk” in the draining water suggests buildup in the lines.
Is it biofilm, or oils and scale?
Oils from lotions and sunscreen can also leave a greasy ring at the waterline, and scale feels rough or gritty rather than slimy. A rough way to separate them:
| What you feel | More likely |
|---|---|
| Slimy, slick, soft film | Biofilm or body-oil buildup |
| Greasy ring at the waterline | Oils and lotions |
| Rough, gritty or crusty | Scale or minerals |
See soft water and slick or gritty hot tub water for texture troubleshooting.
What to do if you find it
Biofilm clings to surfaces and can resist ordinary sanitizer levels, so cleaning has to be physical as well as chemical. A common approach:
- Run a plumbing purge product through the system before draining, following the label.
- Drain the tub. See how to drain and clean a hot tub.
- Clean the shell with a spa-safe cleaner and a soft cloth, including the waterline and the skimmer area.
- Clean or replace the filter. A filter can hold onto slime. See how to clean and replace hot tub filters.
- Refill and rebalance. See how to balance hot tub water.
- Sanitize and shock according to your normal routine. See how to shock a hot tub.
If the problem returns quickly, you may need to repeat the purge, or ask a spa technician to check for hidden plumbing buildup.
Health note
Slimy surfaces and warm water can create conditions where unwanted bacteria grow, and certain skin and respiratory issues have been linked to poorly maintained hot tubs. If you get a rash, a persistent cough, a fever or other symptoms after using a hot tub, stop using it and seek medical advice. Don’t use a slimy tub until it has been cleaned and the water tested.
Preventing biofilm
- Keep sanitizer in range and test regularly.
- Shock on a regular schedule, and after heavy use.
- Clean filters on a schedule and replace them when worn.
- Change the water regularly. See how often to change hot tub water.
- Run a plumbing purge when you drain, if you want extra protection.
- Make sure the water is actually circulating. Stagnant spots allow biofilm to settle. See why your hot tub is not circulating water.
- Keep the cover on when the tub is not in use.