Hot Tub Care

Can you go in a hot tub if chlorine is too high?

Should you soak when hot tub chlorine is too high? Learn why it's best to wait, what too high means, and safe ways to bring the level back into range.

On this page
  1. Short answer
  2. What counts as “too high”?
  3. What can happen if you get in anyway?
  4. How to bring chlorine down
  5. Why did chlorine get too high?
  6. Retest before getting in
  7. Prevention

Short answer

It is generally best not to get in until chlorine has come back down into the recommended range. Slightly high chlorine may only cause mild irritation, but very high levels can irritate the eyes, skin and airways, and the hot, enclosed space of a spa tends to make fumes more noticeable. When in doubt, wait and retest.

This article is general guidance, not medical advice. If you or someone in your household has asthma, a skin condition or another health concern, be extra cautious, and speak to a doctor if symptoms occur.

What counts as “too high”?

Many guides suggest keeping free chlorine in a hot tub at roughly 1-3 ppm. Levels near 4 ppm or above are commonly described as high, and much higher levels are widely considered unsafe for soaking. Your spa manufacturer or chemical label may list a different range, so use that as your reference. See how to balance hot tub water for the other readings that go with it.

Note that test strips and kits vary in how well they read very high chlorine. Some strips can bleach out or give odd readings. If the reading looks strange, retest or use a second method.

What can happen if you get in anyway?

Possible effects of high chlorine include:

  • Red, itchy or dry skin.
  • Stinging, red eyes.
  • Coughing or throat and nose irritation, especially if you breathe the vapor just above the water.
  • Faded swimwear and a faded or damaged cover over time.

Children, people with sensitive skin and people with breathing conditions may react at lower levels.

A strong chlorine smell does not always mean there is too much free chlorine. It can also signal chloramines, which form when chlorine reacts with sweat, oils and other contaminants. In that case, the water may actually need an oxidizer treatment rather than less chlorine. See how to shock a hot tub.

How to bring chlorine down

  • Take the cover off and let the water circulate. Chlorine dissipates over time, faster in sunlight and in warm, moving water. Avoid adding more sanitizer in the meantime.
  • Dilute with fresh water. Drain a portion of the water and refill with fresh water. This lowers chlorine but also changes pH, alkalinity and hardness, so retest afterwards.
  • Use a chlorine neutralizer. Products sold for spas can lower chlorine quickly. Follow the label exactly and avoid overcorrecting.

Do not mix chemicals together, and add products to the water only as the label directs.

Why did chlorine get too high?

  • Too much sanitizer was added, or two people dosed the tub.
  • A shock treatment was done recently and levels have not yet fallen. After a chlorine shock, labels typically give a wait time. Follow it.
  • A floating dispenser or inline feeder is set too high.
  • Water volume is smaller than you assumed, so a normal dose was too strong.

Retest before getting in

Before you soak again, test the water. Confirm that:

  1. Free chlorine is within your manufacturer’s range.
  2. pH is in range. Chlorine is less effective at high pH and more irritating at low pH.
  3. The water is clear enough to see the bottom.

If you are unsure, wait a few more hours and test again.

Prevention

The complete guide to hot tub care

How to Balance Hot Tub Water
Read the guide

Keep exploring

Guides from other topics

All topics →