Hot Tub Care

How to Shock a Hot Tub: Chlorine or Non-Chlorine Shock

How to shock a hot tub step by step, how chlorine and non-chlorine shock differ, how often to do it, how long to wait, and safety tips to follow.

On this page
  1. What shocking does
  2. Chlorine versus non-chlorine shock
  3. Before you shock
  4. How to shock a hot tub, step by step
  5. How long to wait before soaking
  6. How often should you shock?
  7. Safety
  8. Troubleshooting

What shocking does

Shocking means adding an oxidizer to the water to break down contaminants that regular sanitizer does not fully handle. These include body oils, lotions, sweat, dead skin cells and the byproducts that form when sanitizer reacts with them (chloramines with chlorine, bromamines with bromine). Those byproducts are a common cause of the “chlorine smell” and of irritation.

Shocking also helps refresh your sanitizer so it can keep doing its job. In a small, warm, heavily used body of water, contaminants build up quickly, which is why most spa guides recommend a regular schedule.

Chlorine versus non-chlorine shock

Chlorine shock (dichlor) Non-chlorine shock (MPS)
What it is A fast-dissolving form of chlorine An oxidizer, usually potassium monopersulfate
Sanitizes? Yes, as well as oxidizes No, it oxidizes but does not disinfect
Raises chlorine level? Yes Not significantly
Wait before soaking Longer, until chlorine returns to range Often short; follow the label
Often chosen for Heavy use, cloudy or smelly water, bigger problems Routine weekly maintenance, light use, chlorine-sensitive users

Some sources suggest chlorine shock when the tub is used often or by many people, and non-chlorine shock when use is lighter. If you are weighing alternatives to chlorine overall, see non-chlorine hot tub sanitizers.

Always buy a product labeled for hot tubs or spas. Pool shock products are often much stronger or contain additives that are not suitable for a spa, and using them may damage the tub or void a warranty.

Before you shock

  1. Test the water. Adjust alkalinity and pH first, because shock works best when pH is in range. See how to balance hot tub water.
  2. Clean the filter so the product can circulate properly. See how to clean and replace hot tub filters.
  3. Read the label for the dose for your tub’s volume.
  4. Gather safety gear. Gloves and eye protection are sensible, especially with chlorine shock.

How to shock a hot tub, step by step

  1. Remove the cover completely so gases can escape, and leave it off while the shock works.
  2. Run the circulation pump or jets. Many guides recommend turning off air blowers.
  3. Measure the dose carefully for your water volume. Some products say to pre-dissolve granules in a bucket of warm water. Follow the label.
  4. Pour or sprinkle the product evenly around the tub, near the jets or return fittings, with no one in the water.
  5. Let the water circulate for the time stated on the label, often around 20 minutes or more.
  6. Retest sanitizer and pH before anyone gets in.

For outdoor tubs, many owners shock in the evening so sunlight does not burn off chlorine before it can work.

How long to wait before soaking

The wait depends on the product, so follow the label. Non-chlorine shock often allows re-entry after a short period, commonly somewhere between 15 minutes and an hour. Chlorine shock can require several hours or longer, until test strips show chlorine back in the safe range. Use a test, not the clock alone. If chlorine remains too high, see whether you can go in a hot tub if chlorine is too high.

How often should you shock?

A common recommendation is about once a week, and again after heavy use, a party or when the water looks dull or smells off. Tubs used lightly may need it less often. Regular water changes also reduce how much shocking you need. See how often to change hot tub water.

Safety

  • Never mix different chemicals together or store them together.
  • Add chemicals to water, and do not add water to chemicals.
  • Do not add shock while anyone is in the tub.
  • Store products sealed, dry and out of children’s reach.
  • Keep your face away from the container when you open it.
  • Follow the label over any general guide.

Troubleshooting

Cloudy after shocking. Some haziness right after is common, because oxidized contaminants and tiny bubbles need time to filter out. Keep the pump running and the filter clean. See how long cloudy hot tub water takes to clear.

Smell remains. If the water still smells strongly of chemicals after shocking, retest. The smell can come from chloramines rather than high chlorine. A second treatment or a fresh fill may be needed.

Foam appears. See foamy hot tub water.

The complete guide to hot tub care

How to Balance Hot Tub Water
Read the guide

Keep exploring

Guides from other topics

All topics →