What a pool needs every week
Pool care is often summed up as three jobs: circulation (moving water through the pump and filter), cleaning (removing debris and buildup from the water and surfaces) and chemistry (keeping sanitizer and water balance in range). Different sources word it slightly differently, but nearly every routine is some version of these three.
Done in small, regular amounts, none of them takes long. Most of the trouble pool owners run into, such as cloudy water, algae, stained liners and clogged equipment, comes from letting one of the three slip for a couple of weeks.
Are above ground pools high maintenance?
Not necessarily, but they are not maintenance-free. An above ground pool holds less water than most inground pools, so it can be quicker to clean and to adjust. It also tends to have a smaller pump and filter, so it relies more on you staying on top of debris and water testing. A pool that is covered when not in use, has decent circulation and is tested regularly is usually manageable with a modest amount of time each week. For a view of the cost side, see our look at inground pool maintenance costs, which also gives a sense of what is involved in larger pools.
A weekly routine at a glance
A simple pattern many owners use:
- Every day or two: skim floating debris, check that the pump is running and water is moving.
- Two or three times a week: test the water, especially in hot weather or after heavy use.
- Once a week: brush the walls and floor, vacuum, empty the skimmer and pump baskets, and clean or rinse the filter as the manufacturer directs.
- As needed: shock or adjust chemistry based on test results, and top up the water level.
Adjust this to your pool. A shaded, covered pool with few swimmers will need less than a sunny pool under trees.
Skimming, brushing and vacuuming
Skimming with a net removes leaves and insects before they sink and break down. Brushing loosens algae and film that has not yet taken hold. Use a soft nylon brush on vinyl liners, since stiff or metal bristles can damage the surface.
Vacuuming picks up what settles on the floor. You can use a manual hose-and-pole vacuum, a suction or pressure-side cleaner, or a robotic cleaner. Our comparison of robotic, suction and manual pool vacuums can help you choose. If trees overhang your pool, see how to keep leaves out of your pool.
Do not forget the waterline. Oils, lotions and mineral deposits collect there, and it is easier to wipe a thin film each week than to remove a thick band later. See how to remove waterline scum and calcium from pool tile for details.
Water testing and the numbers to aim for
Test strips or a liquid test kit are the basics. Commonly cited targets for a chlorine-sanitized pool are:
- Free chlorine: roughly 1 to 3 ppm (some guidance for above ground pools runs a little higher)
- pH: about 7.2 to 7.6
- Total alkalinity: about 80 to 120 ppm
- Cyanuric acid (stabilizer): commonly in the 30 to 50 ppm range for outdoor pools using stabilized chlorine
- Calcium hardness: often about 200 to 400 ppm for plaster and tile pools; vinyl pools are sometimes kept a little lower
Treat these as general guidance. Your pool manufacturer, liner supplier and sanitizer product label may recommend different ranges, and saltwater pools have additional targets such as salinity. Adjust one thing at a time, follow product label instructions, and never mix pool chemicals together.
Circulation and filtration
Water that does not move does not get filtered or sanitized evenly. Many owners run the pump for several hours a day, often 8 to 12 in a typical season, and longer during very hot weather or heavy use. The right run time depends on your pump size and pool volume, so check the manual.
Clean the filter on the schedule the manufacturer gives. Cartridge filters are generally rinsed and replaced periodically; sand filters are backwashed when the pressure gauge rises above its normal clean reading. If water stops flowing properly, see why an Intex pool pump may not be pumping.
Keeping Intex and other soft-sided pool water in shape
Soft-sided and inflatable-ring pools usually come with a small cartridge or sand filter pump. The routine is the same as above, but the smaller equipment makes it more important to keep debris out, rinse the cartridge regularly and not stretch the pump past its rated pool size. If you are still setting the pool up, our guide to setting up an Intex above ground pool covers the groundwork that makes later maintenance easier.
Kiddie pools and small pools
Small wading pools do not have filtration, so water becomes unsanitary quickly with use. A common approach is to empty and refill them frequently, often daily when children are using them, rather than trying to maintain the water for long. Check the product instructions and local health guidance, and never leave children unattended around any water.
Which pool is easiest to maintain?
Maintenance effort depends on several factors:
- Size: less water usually means fewer chemicals and quicker cleaning.
- Surface: smooth, non-porous surfaces such as fiberglass resist algae buildup, though fiberglass is an inground option.
- Equipment: a properly sized pump and filter, and a good skimmer, make everything easier.
- Cover and location: a cover and a spot away from trees cut down on debris.
- Your habits: consistency matters more than any particular pool type.
Among above ground pools, a modest-sized pool with good circulation and a cover tends to be the least demanding, but there is no single easiest model for everyone. Soft-sided pools are quick to set up but their liners and parts tend to wear sooner; see how long above ground pools last for what affects durability.
Seasonal and occasional jobs
- Opening: remove the cover, reassemble equipment, test and balance the water before swimming.
- Closing: balance the water, clean the pool and filter, lower water and winterize equipment according to the manufacturer’s directions for your climate.
- Inspecting the liner and base: look for wrinkles, bubbles, divots or fading, and see pool liner divots and bubbles and how to tell if a pool liner is bad if something looks off.
- Checking level: if the pool seems to lean, read how to level an above ground pool.
When something goes wrong
Most pool problems are easier to fix early. Keep notes on your test results, and change one variable at a time. If the problem involves structural damage, electrical equipment or significant leaks, consult a qualified pool professional.