Routine Maintenance

Inground Pool Maintenance Costs

What it can cost to maintain an inground pool each year: chemicals, electricity, water, professional service, opening and closing, repairs, and ways to save.

On this page
  1. What to expect
  2. Where the money goes
  3. Do it yourself or hire someone?
  4. Costs by pool surface
  5. Saltwater or chlorine?
  6. Is a pool a lot of maintenance?
  7. Installation costs and home value
  8. Ways to keep costs down

What to expect

Published estimates for the yearly cost of keeping up an inground pool vary a lot. Commonly quoted figures run from roughly a thousand dollars or so a year for basic do-it-yourself care up to several thousand dollars a year when professional service, heating or larger repairs are included. Some guides quote $3,000 to $5,000 a year as a typical range, and others go higher.

The spread is real, not sloppy. Costs depend on where you live, the pool’s size, surface and equipment, your climate and how much of the work you do yourself. Treat any number as a starting point for your own budget, and get local quotes.

Where the money goes

Chemicals and testing. Sanitizer (chlorine or salt), pH adjusters, stabilizer, algae prevention and test supplies. Estimates for DIY chemicals commonly run from a few hundred dollars to over a thousand dollars a year, with heavy use, hot climates and large pools at the upper end.

Electricity. The pump is usually the largest regular electrical load. Costs depend on pump type, run time and local rates. Variable-speed pumps generally use noticeably less power than single-speed models. Heating adds more, and can be a major expense depending on method and climate.

Water. Evaporation, splashing and backwashing mean regular top-ups, and occasionally a partial refill.

Professional service. Weekly service plans vary by region and what is included. Some include chemicals, while others bill separately. Ask what is covered.

Opening and closing. In colder climates, many owners pay for seasonal opening and closing. Prices vary widely and depend on pool size and cover type.

Equipment replacement and repairs. Pumps, filters, heaters, salt cells, cleaners and covers wear out. It is sensible to set money aside for these rather than treating them as surprises.

Insurance. A pool can affect homeowners insurance, and some owners add liability coverage. Ask your insurer.

Surface upkeep. This depends heavily on pool type, covered below.

Do it yourself or hire someone?

Doing the work yourself generally saves money, but it takes a few hours each week in season and some learning. The core of it is the routine in our pool maintenance basics guide: skimming, brushing, vacuuming, water testing and filter care.

Hiring a service saves time and can help if you travel often or do not want to handle chemicals. Compare what each quote includes: chemicals, equipment checks, filter cleaning, opening and closing. If you are leaning towards automation, see robotic, suction and manual pool vacuums for what that equipment does.

Costs by pool surface

The surface of the pool shapes its long-term costs:

  • Fiberglass: often described as the lowest-maintenance type, because the smooth surface resists algae and there is no liner or plaster to replace. Equipment still needs upkeep.
  • Vinyl liner: often cheaper to build, but liners need replacing periodically. Commonly quoted replacement intervals run from several years to over a decade, and costs run into the thousands of dollars. Our guide to how to tell if a pool liner is bad can help you plan, and the pages on pool liner divots and bubbles cover common problems.
  • Concrete or gunite (plaster finish): typically needs more chemical attention and eventual resurfacing, which can be a large expense every decade or two.

Saltwater or chlorine?

Saltwater pools still use chlorine, made by a generator from salt. They tend to cut down on buying and handling chlorine, but you pay for the generator, salt, and eventually a replacement cell. Whether it saves money overall depends on your pool and usage, so compare total costs rather than only monthly chemicals. Check that your pool’s materials and equipment are suitable for salt.

Is a pool a lot of maintenance?

It is a steady commitment rather than an occasional one. In season, a pool needs attention several times a week, even if some of it only takes minutes. Stay consistent and problems stay small; skip it and a few lost weeks can turn into algae treatments, filter trouble and extra chemicals. Features that reduce the burden include a good cover, trimmed trees nearby, properly sized equipment and automatic cleaning. For tips on debris, see how to keep leaves out of your pool and how to remove waterline scum and calcium.

Installation costs and home value

People often ask what an inground pool costs to build and what it adds to a home’s value. Installation prices vary widely by region, pool size, material and site conditions, and typically run well into tens of thousands of dollars. The effect on resale value is also uncertain: it varies by area and buyer preferences, and in some markets a pool adds little. Ask local real estate agents and installers rather than relying on a national figure.

Ways to keep costs down

  • Test regularly so small imbalances do not become big ones.
  • Use a pool cover to reduce evaporation, debris and heat loss.
  • Look into a variable-speed pump and run time that suits your pool.
  • Clean filters and baskets on time to protect equipment.
  • Repair small leaks early.
  • Compare quotes for service, opening and closing.
  • Keep an equipment replacement fund.

If you are weighing up an inground pool against a smaller option, our article on how long above ground pools last offers the other side of the ownership picture.

The complete guide to routine maintenance

Pool Maintenance Basics: A Weekly Routine
Read the guide

Keep exploring

Guides from other topics

All topics →