Why leaves are a problem
A few floating leaves are mostly an annoyance. The trouble starts when they sink. Decomposing leaves add organic material that can feed algae and use up sanitizer. They can also release tannins that discolor water, and may leave stains on some pool surfaces. Large amounts clog skimmer and pump baskets, which cuts circulation. The most effective plan is to stop leaves reaching the water where you can, and remove the rest quickly.
Keep them out in the first place
Use a leaf net or cover. A lightweight mesh net stretched over the pool in the peak leaf-drop weeks catches most debris. When it fills, lift the net and shake or rake off the leaves. Solid or safety covers keep leaves out of the water entirely, but need their own care; see the cover section below.
Trim back overhanging branches. Trimming branches that hang over the pool is often the most effective long-term fix. If trees are large or near power lines, hire a qualified tree service.
Consider a windbreak or planting choices. Fences, hedges or screens can block windblown debris, though evergreen or low-shedding plants are a better choice close to the pool than trees that drop a lot of leaves, flowers or seeds.
Rake the yard and deck. Sweeping or blowing leaves away from the pool area stops them being carried in by the wind.
Skim before they sink
Floating leaves are far easier to remove than sunken ones. In heavy leaf season:
- Skim the surface every day or two, or more often after wind or storms.
- Use a deep-bag leaf net or rake rather than a shallow skimmer net, which lets you scoop larger volumes in one pass.
- Empty skimmer and pump baskets frequently. A full basket restricts flow and can cause the pump to struggle. For what happens when flow is restricted, see why an Intex pool pump may not be pumping.
- Consider a skimmer leaf guard that helps keep large leaves from jamming the opening, if it is compatible with your skimmer.
Use circulation to your advantage
Pool circulation can help steer floating debris toward the skimmer.
- Aim return jets so all of them push water in the same direction around the perimeter, creating a gentle circular current. Angling them slightly upward adds surface movement. This works best with adjustable return fittings.
- Make sure the skimmer is working well. The water level should be about mid-skimmer opening, and the weir flap (the small hinged gate in the skimmer) should be in place.
- Run the pump a bit longer during heavy leaf periods, if your equipment and setup allow it. Check your pump manual and energy costs.
- Consider a surface skimmer robot or floating skimmer. Some owners use solar-powered floating skimmers to collect debris. They help with light debris, but are not a substitute for regular skimming under heavy leaf fall.
Removing leaves that have sunk
- Use a leaf rake or bagged leaf net to scoop leaves from the floor. A deep-bagged rake covers a lot of area, but go gently on vinyl to avoid damaging the liner.
- Use a leaf canister or leaf vacuum. These attach between the vacuum hose and the skimmer or pump, and trap leaves so they do not clog the basket. Some leaf gulpers run off garden hose pressure.
- Use a robotic or other cleaner with a large debris capacity if you deal with leaves often. See our comparison of robotic, suction and manual pool vacuums.
- Do not leave them. The longer leaves sit, the higher the risk of staining and algae.
Handling covers carefully
If you use a cover over winter or when the pool is closed, leaves on the cover still need attention. Wet leaves are heavy and can block drainage on a mesh cover or leave a mess on a solid cover.
- Clear the cover in several light passes during leaf fall rather than one heavy cleanup after everything has fallen and gotten wet.
- A leaf blower is often recommended for dry covers, because it moves debris without touching the fabric.
- Avoid stiff rakes and metal tools, which can damage the cover.
- Do not walk on a cover that is not designed to be walked on. Check the cover’s instructions.
- Solid covers collect standing water, which needs managing, typically with a cover pump. A pool of water on a cover can be dangerous for children and animals.
Follow the cover manufacturer’s guidance. When spring comes, see removing a winter pool cover without dumping debris for getting the cover off cleanly.
Notes for above ground pools
Above ground pools often have a smaller skimmer and a smaller filter pump, so a heavy leaf load can overwhelm them faster. A net or cover is especially useful, and it is wise to keep a long-handled skimmer net or leaf rake nearby. Be careful to avoid scratching soft liners with metal-framed rakes or hard brushes, and use a soft brush for liner surfaces. Our pool maintenance basics guide covers a broader weekly routine.
Stains and tannins
Leaves that decompose in the water can leave brownish tannin stains, particularly on plaster surfaces, and discolor the water. Keeping the pool free of leaves and keeping water balanced helps. If stains form, ask a pool supplier about stain treatment suited to your pool surface, since the right product depends on whether the stain is organic or metal, and what the pool is made of. Be careful with strong chemicals on vinyl liners. Waterline residue is a separate issue; see how to remove waterline scum and calcium.