Plumbing and Leaks

The Pool Skimmer Weir Gate Explained

What a pool skimmer weir gate does, why it matters, how to tell when it is failing, and how to replace it with the right part.

On this page
  1. What a weir gate is
  2. What it does
  3. Do you really need one?
  4. Signs a weir is failing
  5. Replacing a weir gate
  6. Water level and the weir
  7. Keeping it working

What a weir gate is

The weir gate, also called a weir door, weir flap or skimmer weir, is the small hinged flap at the mouth of a pool skimmer. It sits at the waterline and swings or floats as water is drawn into the skimmer. It is usually plastic, and it is held in place by pins, a clip or a spring-loaded mount, depending on the skimmer model.

What it does

The weir has two jobs:

  • Directs surface water in. When the pump runs, the weir floats so that a thin layer of surface water flows over it into the skimmer. Narrowing the opening this way concentrates the suction at the surface, where leaves, insects and floating debris are.
  • Keeps debris from escaping. When the pump stops, the flap swings back toward closed. This helps keep leaves and debris inside the skimmer basket rather than letting them drift back into the pool.

Do you really need one?

Opinions vary. A skimmer will still draw water without a weir, but most pool professionals recommend keeping one in place because skimming is less effective without it and debris can float back out when the pump shuts off. Pool owners debate how much damage a missing weir does to the pump. A key risk is low water combined with a missing or stuck weir, which can let the skimmer pull air. If yours is missing, replacing it is inexpensive and simple.

Signs a weir is failing

  • Visible cracks, chips or missing pieces
  • The gate is stuck open or stuck closed
  • The gate has come out of the skimmer completely
  • A pivot pin or clip is lost or broken
  • Debris floats past the skimmer rather than getting pulled in
  • The pump loses prime or draws air more often than before

Weir gates wear out from UV light, pool chemicals, physical knocks from debris or pool tools, and age. Plastic that has become brittle in the sun is one of the most common causes of cracks.

Replacing a weir gate

For most skimmers this is a quick job that you can do yourself.

  1. Turn off the pump at the breaker before putting your hand in the skimmer.
  2. Remove the basket so you can see the opening.
  3. Remove the old gate. Spring-loaded designs usually let you push one side in and angle the gate out. Fixed-pin designs may slide out or need the pins worked free. If the gate is broken, remove any pieces left behind.
  4. Clean the opening where the gate pivots, clearing algae, debris or mineral buildup.
  5. Get the right replacement. Check your skimmer brand and model, which is often printed inside the skimmer or on the lid. Brand-specific weirs tend to fit best. Universal weirs exist, but check the width and the mounting style.
  6. Install the new gate, seating one pin first and then the other, and make sure it swings freely.
  7. Restart the pump and watch that the gate floats and moves with the flow.

Water level and the weir

The water level has to be right for the weir to work. If it is too high, the gate sits under the water and cannot do its job. If it is too low, the skimmer can pull in air. See our article on where the water level should be on a pool skimmer for the usual target.

Keeping it working

  • Clear debris from the skimmer mouth regularly so nothing jams the flap
  • Keep chemicals balanced and avoid very high chlorine levels, which can wear plastic faster
  • Keep children and pool tools from pulling on the gate
  • Inspect it a couple of times a season, and replace it at the first sign of cracking

A weir is only one skimmer part. If your skimmer is clogged, see how to unclog a pool line, and for the whole system, see our pool plumbing overview.

The complete guide to plumbing and leaks

Pool Plumbing System: Parts and How Water Flows
Read the guide

Keep exploring

Guides from other topics

All topics →