Short answer: it depends on where the leak is
Fixing a pool leak can cost very little or a great deal. A worn o-ring, a loose fitting or a small liner patch is usually inexpensive. A cracked pipe buried under a deck, a leak in the shell, or a liner that has to be replaced can run into the thousands. Prices vary by region, pool type and company, so treat any numbers you see online as rough guides and get written quotes.
Cheap fixes
These often cost little in parts and can be done by a pool owner:
- A worn pump lid o-ring or a loose union at the equipment pad
- A replacement pump shaft seal. See how to replace a pool pump shaft seal
- A skimmer gasket or faceplate seal that has dried out
- A vinyl liner patch for a small tear. See how to patch a vinyl liner underwater
Mid-range repairs
These typically need more time, more skill or a professional:
- Replacing a section of exposed PVC pipe or fittings, as covered in repairing return line leaks and PVC pipe
- Re-sealing a skimmer where it meets the pool wall, or replacing a return fitting
- Repairing a light niche or conduit leak
- Replacing a failed pump, valve or filter component
Expensive repairs
- Underground pipe repairs, especially under concrete or a deck, because they may involve cutting and then restoring the surface
- Shell or plaster cracks in concrete and gunite pools
- Replacing a vinyl liner, which also involves draining and refilling the pool
- Repairs where ground movement is the cause, since the underlying problem may need to be addressed too
Leak detection cost
Finding the leak can be a cost of its own. Professional leak detection usually involves pressure testing, dye testing, and listening or electronic equipment. In many areas this runs to a few hundred dollars, though it varies. Detection is sometimes worth paying for because it avoids digging in the wrong place, and some companies bundle detection with repair. Before paying, you can do your own groundwork with a bucket test and with the pump-on, pump-off comparison in losing water in an inground pool. Telling a technician where the loss seems to be coming from can help them work more efficiently.
The cost of not fixing it
Putting off a repair costs money in several ways:
- Water and chemicals. Refilling a pool repeatedly adds to your water bill, and each top-up dilutes the chemicals
- Equipment damage. If the level falls below the skimmer, the pump can run dry
- Ground damage. Water leaking from buried pipes can wash out soil around the pool and deck
- Bigger repairs later. A small crack or loose fitting can get worse
A rough way to estimate the water you are losing is described in our bucket test guide.
Ways to keep the cost down
- Check the cheap, visible suspects first: pump lid, unions, valves, skimmer and return fittings
- Do a bucket test and a pump on/off test before calling anyone
- Get more than one quote for any major repair
- Ask what the quote includes: detection, repair, restoring the surface, refilling and rebalancing the water
- Ask whether the repair is guaranteed, and for how long
- Keep records of water use and pool-level readings to share with the technician
For a view of which parts are involved, our pool plumbing overview may help you ask better questions.