Plumbing and Leaks

Pool Main Drains: What They Do and How to Unclog Them

What a pool main drain is, why it is not for emptying the pool, how to tell when it is clogged, and how to clear it with a drain bladder or hose.

On this page
  1. What a main drain is
  2. What a main drain does (and does not do)
  3. Safety and drain covers
  4. Signs your main drain is clogged
  5. How to unclog a pool drain
  6. Can you run a pool without the main drain?
  7. How to block a main drain
  8. When to call a pro

What a main drain is

The main drain is a suction outlet at the lowest point of an inground pool, usually in the deep end. It is covered by a grate or cover and connects to the pump by an underground pipe. It is the answer to the common question “what is the drain at the bottom of a pool called”: a main drain, or sometimes a bottom drain.

What a main drain does (and does not do)

Despite the name, a main drain is not normally used to empty the pool. Its job is circulation. Along with the skimmers, it gives the pump a second place to draw water from, which:

  • Pulls water from the bottom of the pool, which can help spread chemicals and temperature more evenly
  • Collects some heavier, settled debris and fine dirt
  • Lets you adjust how much suction comes from the surface versus the bottom, using valves at the equipment

Pool builders and owners disagree on how much the main drain matters. Some builders consider bottom drains an important part of good circulation, while many modern pools, especially some vinyl-liner and skimmer-only designs, are built without one and work fine. Both are common.

Safety and drain covers

A main drain is a strong suction point. In the past, single drains with flat covers created a serious entrapment hazard. In the United States, the Virginia Graeme Baker Pool and Spa Safety Act set requirements for drain covers and, for many pools, for dual drains or other anti-entrapment measures. The law is aimed mainly at public and commercial pools, but compliant, securely fastened covers are a sensible choice on any pool.

Practical points:

  • Never run a pool with a missing, cracked or loose drain cover.
  • Keep children and swimmers away from suction outlets.
  • If you are unsure whether your cover meets current standards, ask a licensed pool professional.

Signs your main drain is clogged

  • Weak or no suction at the drain, with most flow coming from the skimmers
  • The pump basket staying cleaner than you would expect, or the pump running with less flow
  • Debris settling in the deep end instead of being drawn away
  • Air gulping noises or poor flow when only the main drain valve is open

How to unclog a pool drain

Check the valves first

Before assuming the pipe is blocked, look at the equipment pad. A closed, partly closed or faulty valve can make the main drain look clogged because the system is only pulling from the skimmer. Make sure the valve for the drain line is open and working.

Using a drain bladder such as the Drain King

A drain bladder is a rubber tool that attaches to a garden hose. When the water is turned on, the bladder expands to grip the inside of the pipe and sends pulses of water toward the clog. The Drain King is a well-known example, and bladders come in sizes for different pipe diameters.

The general method:

  1. Turn off the pump at the breaker.
  2. Remove the pump lid and strainer basket.
  3. Adjust valves so the line you want to clear is the open one.
  4. Attach the bladder to a garden hose and feed it into the suction pipe leading to the drain, following the product’s directions on insertion depth.
  5. Turn on the water gradually and let it run for a few minutes. If you can, have someone watch the drain in the pool to see whether debris is pushed out.
  6. Reinstall the basket and lid, prime the pump, and check the flow.

Use only the water pressure and sizes recommended by the manufacturer. Old or cracked pipe can be damaged by too much pressure, and debris may blast out of the drain into the pool.

Hose-and-rag method

If you do not have a bladder, you can push a garden hose a few inches into the suction opening and pack a wet rag around it as a seal, then turn on the water in short bursts. Because the rag only partly seals, it tends to be less effective than a bladder. See how to unclog a pool line clogged with leaves for a longer walkthrough of this approach.

What to avoid

  • Do not force a rigid drain auger through the pipe. Pool lines often have short-radius elbows, and a tool can get stuck.
  • Sewer jetters are generally a poor fit for submerged pool lines.
  • Do not use chemical drain cleaners in pool pipes.

Can you run a pool without the main drain?

Yes. Many pools are designed with skimmers only, and you can also run a pool that has a main drain with the drain valve closed. If the drain is closed, check that the pool still circulates well and that the skimmer line is not being asked to carry more flow than it can handle.

How to block a main drain

If you want to stop using a main drain, the usual approach is to close its valve at the equipment pad so it no longer draws suction. A permanent change, such as capping the line, should be done by a professional, since the work involves the pool shell and sometimes the drain sump.

When to call a pro

Call a pool service company if the line is still blocked after a careful attempt, if you suspect the pipe is collapsed or broken, or if you see the pool losing water while the drain line is open. A leak in a drain line sits below the pool and may require pressure testing. Our guide on losing water in an inground pool explains how to narrow it down. For how the drain fits with the rest of the system, see our pool plumbing overview.

The complete guide to plumbing and leaks

Pool Plumbing System: Parts and How Water Flows
Read the guide

Keep exploring

Guides from other topics

All topics →