Routine Maintenance

How to Remove Waterline Scum and Calcium From Pool Tile

Tell oily waterline scum from calcium scale, then clean pool tile safely with the right cleaner and tools, and learn how to keep the waterline band from coming back.

On this page
  1. What is that band at the waterline?
  2. How to tell which one you have
  3. Removing oily scum
  4. Removing calcium scale
  5. Safety
  6. Surface warnings
  7. Preventing the waterline band

What is that band at the waterline?

The ring that forms where the water meets the tile is usually one of two things, or a mix of both:

  • Scum: a greasy or grimy film made up of body oils, sunscreen, cosmetics, pollen, dirt and other organic material. These collect at the surface, and as the water level rises and falls with use, rain and evaporation, they cling to the tile or wall.
  • Calcium scale: a hard, white, gray or crusty mineral deposit that forms when minerals in the water come out of solution. It is more likely when water is hard, pH or alkalinity are high, or water evaporates at the waterline and leaves minerals behind.

They need different treatments, so work out which you are dealing with first.

How to tell which one you have

  • Feel it. Scum tends to feel slick or greasy and often smears when you wipe it. Calcium feels rough, hard and gritty, and does not smear.
  • Look at the color. Scum is often tan, gray or brown. Calcium is typically white or off-white, and may look like a crust or small ridges.
  • Try a small test. Wipe a small spot with a soft cloth and a mild pool tile cleaner. If it comes off, it is probably scum. If it does not, and the deposit is hard and crusty, it is probably calcium. Some pool supply shops will advise on a test using a small amount of mild acid on a hidden spot, but follow label instructions and check your surface first.

Removing oily scum

  1. Start gentle. A soft sponge or non-scratching pad with a cleaner made for pool tile is usually enough. Some owners use a mild dish soap, but suds can foam in the pool, so use sparingly and keep it out of the water or choose a pool-specific product.
  2. Use a pool tile cleaner. Products formulated for waterline grime can break down oils. Follow the label closely.
  3. Scrub and rinse. Work along the waterline in small sections and rinse residue away.
  4. Lower the water level if needed. Lowering the level a little can make the upper band easier to reach, but do not run the pump with the water below the skimmer opening, and do not drain vinyl or above ground pools without checking the manufacturer’s guidance.
  5. Consider an enzyme product. Pool enzyme products are sold to help break down oils and organic residue over time. Some owners add them regularly to reduce buildup, though results vary and they do not replace sanitizer or cleaning.

Removing calcium scale

  • Light scale: often responds to a pool-safe scale remover or a mild acidic cleaner made for tile, applied and scrubbed according to the label.
  • Pumice stone or tile scrubber: a pumice stone made for pool tile is commonly used on hard deposits. Keep both the stone and the tile wet and work gently. Be careful, since pumice can scratch some surfaces, including glass tile and some finishes. Test a small hidden spot first.
  • Heavier scale: may need repeated treatments or professional bead blasting or other methods. A pool service can help if the scale is thick, widespread or on delicate tile.

Cleaning off scale does not fix what caused it. If it keeps coming back, test calcium hardness, pH and total alkalinity. See pool maintenance basics for commonly used ranges, and ask a pool supply store to test a water sample if you are unsure.

Safety

  • Wear gloves and eye protection. Pool acids and cleaners can burn skin and eyes.
  • Never mix chemicals. Combining chlorine products with acids or other cleaners can release dangerous gases.
  • Ventilate, and keep children and pets away.
  • Read and follow the product label, and keep cleaners out of the pool water unless directed.
  • When diluting acid, add acid to water, not water to acid, and follow the manufacturer’s instructions.
  • If you are unsure, hire a professional.

Surface warnings

  • Vinyl liners and above ground pools. Avoid pumice, strong acid and abrasive pads on vinyl, which can scratch, damage or discolor it. Use a soft cloth or sponge with a cleaner meant for vinyl. Above ground pools usually have no tile, but a scum ring can still form on the liner at the waterline.
  • Glass and delicate tile. Be cautious with abrasives and acids.
  • Natural stone or coping. Acids can etch stone, so keep them away from decking and coping.

Preventing the waterline band

  1. Keep the water balanced. Stable pH, alkalinity and calcium hardness reduce scale.
  2. Keep the water level near the middle of the skimmer opening. Skimmers work best at the right level, and a steady level avoids a single stripe forming.
  3. Brush the waterline weekly. A quick pass with a soft brush stops buildup from hardening.
  4. Run the pump and keep the skimmer clear. Good surface skimming pulls oils into the filter. Empty baskets regularly.
  5. Rinse off before swimming. Showering helps reduce lotions, oils and cosmetics in the water.
  6. Reduce debris. See how to keep leaves out of your pool for tips that also reduce organic load.
  7. Use a surface skimmer or sponge. Some owners use absorbent sponges or scum-catching products to pull oils from the surface.

Making the waterline part of your weekly routine takes only a few minutes and stops the build-up from becoming a big job.

The complete guide to routine maintenance

Pool Maintenance Basics: A Weekly Routine
Read the guide

Keep exploring

Guides from other topics

All topics →