Routine Maintenance

How to Level an Above Ground Pool That's Out of Level

How to check whether an above ground pool is out of level, why it happens, and cautious options for soft-sided and framed pools, including when to call a pro.

On this page
  1. First, confirm the pool is actually out of level
  2. How much is too much?
  3. Why pools go out of level
  4. Soft-sided pools
  5. Framed and steel-wall pools
  6. Be careful about draining
  7. What not to do
  8. When to call a professional
  9. Preventing the problem

First, confirm the pool is actually out of level

Water always finds its own level, so the water surface is a good reference. If the water sits higher against one part of the wall than another, the pool is out of level. To check:

  1. Measure from the water surface to the top of the wall (or the top rail) at several evenly spaced points around the pool.
  2. Compare the measurements. If they differ noticeably, the ground or the pool is out of level.
  3. Check whether the pool appears to lean or whether one side has sunk, and whether the wall looks stressed, bulging or buckling.
  4. Look at the ground around the pool for signs of erosion, washout or standing water.

Take notes and photos so you can track whether the situation is getting worse.

How much is too much?

There is no single number that applies to every pool. Manufacturers set their own tolerances for how level the base must be at installation, and the instructions for your model are the best guide. As a general principle, small differences may be tolerable, but a pool that is visibly leaning, shows wall stress or is changing over time needs attention. If you are unsure, ask the manufacturer or an experienced installer.

Why pools go out of level

  • Poor initial site preparation, such as building up low spots with loose soil or skipping compaction.
  • Soil settling or erosion, often after heavy rain or from water running under the pool.
  • A leak that washes out soil under or beside the pool.
  • Uneven support under legs of framed pools, where one leg has sunk.
  • Soft or organic ground, where roots or sod have decayed.
  • A slope, where the pool was placed on a hillside without enough cutting and retaining.

Find the cause before you fix the symptom. Otherwise it will keep happening. If you suspect a leak, see how to tell if a pool liner is bad for a leak-check method.

Soft-sided pools

Inflatable-ring and soft-sided pools sit directly on the ground, so levelness depends mostly on the ground beneath. Some small adjustments may be possible without a full teardown, but the safest approach is usually to lower the water, reposition or smooth the base, and refill carefully. Because these pools tolerate being drained and moved better than rigid pools, it is often easier to lower the water, adjust the base and set the pool back down level. Follow the manufacturer’s instructions on draining, and see how to set up an Intex above ground pool for a clean restart.

Framed and steel-wall pools

These are harder. A filled pool weighs many tons, and the walls and frame rely on being supported evenly. Leveling a framed pool often means draining at least part of the pool, and sometimes taking it down.

  • Leg height issues: if one leg has sunk, a professional may be able to lift or shim that area after the water level has been lowered. Do not try to jack up a full pool.
  • Wall-supported ground issues: if the ground has washed out under the wall, the base needs to be repaired, which usually involves lowering or draining the pool.
  • Installer help: for steel-wall pools, an experienced installer is the safest choice, because the work is hard to do safely.

Be careful about draining

Draining can solve a leveling problem, but it also creates risks:

  • Some above ground pool walls rely on water weight for stability. Draining too far, or very quickly, can lead to buckling or collapse in some designs.
  • Liners can shrink, wrinkle or tear when the water level drops.
  • High groundwater or heavy rain can lift or damage an empty pool.
  • Water leaving quickly can erode the ground around the pool.

Check the manual first for how much water can safely be removed and how, and drain in a controlled way to a suitable location.

What not to do

  • Do not try to jack up or shove a full pool.
  • Do not shovel soil or sand under a filled pool wall.
  • Do not drain completely without guidance.
  • Do not ignore a pool that is visibly changing shape, since a failed wall can release a large amount of water suddenly and may injure people.

If the pool is structurally stressed, bulging or leaning dangerously, keep people away from it and call a professional.

When to call a professional

Get help if the pool is a framed or steel-wall model, if the lean is significant or getting worse, if you suspect a leak or washout, or if you do not feel confident about draining. A local above ground pool installer can assess the base, the frame and the walls, and quote the repair. A relevant note: if you end up replacing a liner during the work, see what it costs to replace an above ground pool liner.

Preventing the problem

The complete guide to routine maintenance

Pool Maintenance Basics: A Weekly Routine
Read the guide

Keep exploring

Guides from other topics

All topics →