Short answer
There is no universal schedule. A common rule of thumb is to replace pool water every 3 to 5 years, and some sources say longer, up to 5 to 7 years. Others say a well-maintained inground pool may never need a full drain. What decides it is not the calendar but your water test results and whether you need to do any repairs.
Draining every year is generally considered unnecessary.
Why a calendar is a weak guide
How fast water wears out depends on:
- Fill water. Hard source water or high dissolved minerals start you off closer to the limit.
- Evaporation. When water evaporates, minerals and salts stay behind. Hot, dry climates concentrate them faster.
- Stabilizer use. Stabilized chlorine tablets add cyanuric acid (CYA) over time, and CYA does not evaporate.
- Bather load and weather. Heavily used pools and pools with lots of debris or rainfall change faster.
- Maintenance. A pool that is tested and balanced regularly stays healthy longer.
Signs a drain may help
Testing is what really tells you. Things people commonly look at:
- Total dissolved solids (TDS). Some pool professionals suggest considering a drain when TDS climbs to roughly 2,500 to 3,000 ppm or more, although saltwater pools run higher by design. Ask a pool store how to interpret TDS for your setup.
- Cyanuric acid. When CYA is well above the 80 to 100 ppm range, chlorine becomes less effective. Dilution is the only practical way to lower it, unless you use a reverse osmosis service.
- Calcium hardness and scale. Persistent scale on tile and equipment, or hard-to-clear staining, can point to excess minerals.
- Chemistry that keeps drifting. If water will not hold balance no matter what you do, the fill water itself may be the cause.
- Repairs. Liner replacement, resurfacing, structural work and some plumbing repairs need an empty or partly empty pool.
Partial drain vs full drain
For chemistry problems, a partial drain and refill is usually enough. Replacing a portion of the water, for example a third to a half when CYA is high, dilutes the excess, and retesting afterward tells you whether you need to go further. A full drain is mainly for repairs and for cases of very high dissolved solids that dilution cannot fix.
When not to drain
Do not drain just to deal with:
- Algae or cloudy water. Shocking, brushing, vacuuming and filtering normally fix these.
- Storm debris or a bad smell. Cleaning and filtration do the job.
- Seasonal habit. Unless you winterize in a way that calls for it, there is no need to drain at season’s end.
Draining also carries risks. Empty inground pools can be pushed upward by groundwater (see our hydrostatic pressure guide), and above-ground liners can shrink and wrinkle.
Pool type differences
- Vinyl-liner pools: liners can shrink if left empty, so keep the empty time short.
- Concrete or plaster pools: plaster may crack or flake when it dries out, and groundwater can be a problem.
- Fiberglass pools: do not fully drain without consulting the manufacturer. Read how to drain a fiberglass pool safely.
- Above-ground pools: often drained more simply, but still need care with the liner and the walls.
Stretching the time between drains
- Test the water regularly and keep pH, alkalinity and calcium hardness in range.
- Consider unstabilized chlorine, or liquid chlorine, if CYA is climbing.
- Use a pool cover to reduce evaporation and debris.
- Top up with fresh water as needed, rather than letting the pool run low.
- Keep the filter clean and the circulation running.
- Record your test results so you can see the trend.
Before you drain
When you do decide to go ahead, plan the discharge, the weather and the refill. Our complete guide to draining and refilling a pool covers the steps, and how the refill is priced can help you budget.