Saltwater Pools

How to Clean a Salt Cell: Removing Calcium Scale with an Acid Soak

Learn how to clean a salt cell by soaking off calcium scale in diluted acid: when to clean, what you need, safe steps, and how to prevent buildup.

On this page
  1. Why scale builds up
  2. How often to clean
  3. What you need
  4. Step-by-step
  5. Safety and disposal
  6. If cleaning doesn’t help
  7. Preventing scale

Why scale builds up

As a salt cell works, calcium and other minerals in the water can deposit on the plates as a white, crusty layer. This is more likely when pH is high, calcium hardness is high or the water is warm. Scale insulates the plates, so the cell makes less chlorine and has to work harder. Left alone, it can shorten the cell’s life. Keeping pH and calcium in range is the best way to slow it. See our saltwater pool care guide for target levels.

How often to clean

Clean the cell when you see scale or when your controller indicates an inspection is needed, rather than on a rigid calendar. Many manufacturers and pool professionals suggest looking at the cell every month or so during the peak season and cleaning every few months if scale has formed. Some say once a season is the minimum. Cleaning a clean cell is not helpful, because repeated acid exposure can wear the plates’ coating. Follow your manufacturer’s guidance if it differs. Some cells are self-cleaning by reversing polarity, which reduces but does not always eliminate the need for a manual soak.

What you need

  • Chemical-resistant gloves, safety goggles and clothing that covers your skin.
  • A plastic bucket large enough for your solution.
  • A cell cleaning stand or a cap for the cell, if your model has one.
  • Muriatic acid (or the cleaner your manufacturer recommends). Some manufacturers suggest a milder option such as a diluted white vinegar solution for light scale.
  • A garden hose with gentle flow.
  • A soft plastic brush or a wooden or plastic stick for loosening scale, never metal tools.

Step-by-step

  1. Turn off the generator and pump. Switch off power at the control unit and the breaker if recommended.
  2. Remove the cell. Undo the unions, take out the cell and note how it fits. Check the plates for scale and for flaking or thinning.
  3. Rinse. Use a hose to remove loose debris. Do not use a pressure washer.
  4. Mix the solution. A common dilution is four parts water to one part muriatic acid. Always add acid to the water, never water to acid. Mix outdoors in a ventilated spot.
  5. Soak. Put the cell in the stand or fit the cap, then fill it with the solution until the plates are covered. Fizzing means the acid is working. Soak for about 10 to 15 minutes, or the time your manufacturer specifies, and check progress. Stop as soon as the scale has dissolved. Leaving it longer does not clean better and can harm the coating.
  6. Rinse thoroughly. Rinse the cell with clean water until there are no remaining traces of acid.
  7. Reinstall. Refit the cell and tighten the unions by hand as specified. Check for leaks when the pump restarts.
  8. Retest. Check pH and chlorine after a day or so, and confirm the cell is producing chlorine again.

Safety and disposal

Muriatic acid is hazardous. Its fumes irritate the eyes and lungs, and it can burn skin. Work outdoors, avoid breathing the vapor, keep children and pets away and have water nearby to rinse spills. Never mix acid with chlorine or other chemicals. Local rules differ on disposal of used solution, so check your local guidelines. Some owners dilute and neutralize spent solution before disposal, and some reuse it for another soak, but follow your local rules and the acid label.

If cleaning doesn’t help

If the cell is clean and chlorine output is still low, check salt, flow, water temperature, stabilizer and the controller’s settings. Our guide to a salt chlorinator not producing chlorine covers each cause. If the plates look worn and the cell is several years old, it may be near the end of its life. See how long a salt cell lasts.

Preventing scale

  • Keep pH in range and avoid letting it drift above the upper end of the target.
  • Keep calcium hardness within the recommended range, and consider treating hard fill water.
  • Do not run the cell at higher output than necessary.
  • Check the cell regularly so you catch scale early.

The complete guide to saltwater pools

Saltwater Pool Care: Salt, pH and Shock
Read the guide

Keep exploring

Guides from other topics

All topics →