Saltwater Pools

Chlorine-Free Pool Systems and Mineral Purifiers

Explore chlorine-free pool systems and mineral purifiers: how they work, what they still need, their drawbacks, and how they compare with saltwater.

On this page
  1. Is there a swimming pool without chlorine?
  2. What is a mineral system?
  3. Other chlorine-free options
  4. How they compare
  5. Do you still put chlorine in a mineral pool?
  6. Drawbacks to consider
  7. Where saltwater fits

Is there a swimming pool without chlorine?

There are pools that use little or no chlorine, but a fully chemical-free home pool is rare. Most so-called chlorine-free systems reduce the amount of chlorine you need rather than eliminate the need for a sanitizer. The reason is practical: a pool has to keep protecting swimmers while the water sits and while people are in it, and many technologies treat water only as it passes through the equipment. A residual sanitizer in the pool does the rest.

If you are tempted to go fully without, discuss it with a local pool professional and follow your region’s health guidance, especially for pools with heavy use.

What is a mineral system?

A mineral purifier releases small amounts of minerals, most often silver and copper, into the pool. Silver has antibacterial properties and copper helps control algae. Some products also include zinc or other minerals. The minerals build up in the water and work alongside a sanitizer, which in most cases is a reduced level of chlorine or bromine.

Mineral systems come in several forms:

  • Skimmer or pump-basket cartridges that release minerals as water flows over them.
  • Floating dispensers, sometimes combining a mineral cartridge with a chlorine cartridge.
  • Inline units plumbed into the circulation system, including electronic ionizers that release copper and silver ions.

Cartridges need replacing on the schedule the manufacturer gives, and some electronic units need electrode replacement.

Other chlorine-free options

  • Ozone and advanced oxidation. Ozone is a strong oxidizer that treats water as it passes through the equipment. It typically needs a residual sanitizer too.
  • Ultraviolet (UV). A UV chamber inactivates microorganisms in water that flows past the lamp. Like ozone, it does not leave a residual in the pool, so a low level of another sanitizer is commonly still used.
  • Biguanide systems. These use a non-chlorine polymer sanitizer and a separate oxidizer. They can work but are more specialized, with their own chemistry and filter considerations, and you should not mix them with chlorine products.
  • Natural or biological pools. These use plants and gravel regeneration zones instead of chemicals. They are a design choice built into the pool from the start, not something you add to a standard pool.

How they compare

System Treats water Residual in the pool Usually still needs
Mineral purifier In the pool Yes (minerals) Low level of chlorine or bromine
Ozone As it circulates No A residual sanitizer
UV As it circulates No A residual sanitizer
Biguanide In the pool Yes Its own oxidizer program
Natural pool Biologically Not applicable Careful design and maintenance

Do you still put chlorine in a mineral pool?

Generally yes, at a lower level. Manufacturers typically specify how low the chlorine can go, and many suggest letting chlorine fall to a low level before adding minerals. Follow the instructions for your product. You will still test the water and balance pH, alkalinity and calcium hardness as for any pool. Shocking is still part of the picture, and some owners use a non-chlorine oxidizer for routine shocking, with occasional chlorine shock to deal with problems.

A related question is the difference between free chlorine and total chlorine. Free chlorine is the chlorine that is still available to sanitize. Combined chlorine is chlorine that has already reacted with contaminants to form chloramines. The strong “pool smell” usually points to combined chlorine rather than too much free chlorine. Our saltwater pool care guide covers how to read chlorine levels and shock.

Drawbacks to consider

  • Staining. Copper can leave stains when it comes out of solution, particularly if the water is unbalanced or your fill water already has copper in it. Testing your source water for metals before using a mineral system is sensible.
  • Cost. Equipment ranges from budget cartridge systems to electronic units costing considerably more, and cartridges are an ongoing expense. A lower chlorine bill may not offset the extra products.
  • Not a complete solution. Minerals alone are not designed to handle everything, so you still need a sanitizer and good filtration.
  • Cloudy water and algae. If water turns cloudy or green, you will usually need chlorine or another oxidizer to recover, then return to your normal program.

Where saltwater fits

A saltwater pool is not chlorine-free. It makes its own chlorine from dissolved salt, which is why some people choose it, since there is less handling of chlorine products. Some owners combine salt with a mineral system, but that adds complexity and cost. If you are considering salt instead, see saltwater vs chlorine for above ground pools and whether saltwater pools cost more to maintain.

The complete guide to saltwater pools

Saltwater Pool Care: Salt, pH and Shock
Read the guide

Keep exploring

Guides from other topics

All topics →