The short answer
The best salt for a pool is a high-purity sodium chloride product sold for use in pools. Look for a purity of around 99 percent or higher and no additives that you do not want in your water. No single brand is clearly best. Several well-known brands sell suitable salt, and what matters more is purity, the right grain size for your system and avoiding the wrong kind of salt.
Always check your salt chlorine generator’s manual, since it may include requirements or recommendations for the type of salt.
What to look for on the label
- Sodium chloride at roughly 99 percent purity or better. Impurities can cloud the water, leave deposits or stain surfaces.
- Intended for swimming pools. Pool salt is sold specifically for this use.
- No iodine. Non-iodized salt is the usual recommendation.
- Minimal or no additives. Some salts contain anti-caking agents or other additives. Some manufacturers advise avoiding them, so choose products that state they are suitable for salt chlorine generators.
- A grain size that dissolves well. Coarser grains are common in pool salt. Very large crystals or compressed pellets dissolve more slowly. If you have a generator that specifies a grade, follow that.
Types of pool salt
Pool-suitable salt is generally produced in one of three ways:
- Mechanically evaporated. Brine is evaporated to leave very pure crystals. This is often the cleanest option.
- Solar. Seawater or brine is evaporated by the sun, producing sodium chloride that is usually suitable, though quality varies by supplier.
- Mined. Salt is mined from underground deposits and then processed. It can be a good choice if the product is labeled for pools and meets purity requirements.
All three can work. Choose on the basis of the purity figure and manufacturer recommendations rather than the production method alone.
Salts to avoid
- Table salt, which usually contains iodine and anti-caking agents.
- Rock salt, which tends to be less pure and can contain insoluble material.
- Himalayan salt and Epsom salt. Himalayan salt contains minerals and impurities, and Epsom salt is magnesium sulfate, not sodium chloride.
- Calcium chloride, which is a different compound used to raise calcium hardness, not to supply salt for a chlorine generator.
- Water softener salt, unless it is clearly labeled as suitable for pools. Some products include additives, and compressed pellets dissolve slowly.
Buying tips
Pool salt is typically sold in bags of around 40 pounds. As a rough guide, one 40-pound bag raises the salt level of a 10,000 gallon pool by about 480 ppm. Our guide to how much salt to add to a pool shows how to work out the right amount for your volume, and salt for above ground pools covers smaller pools. Buy only what you need to reach the target, add it with the generator turned off, and retest. If you overshoot, see is 4000 ppm salt too high. For broader chemistry, see our saltwater pool care guide.