Algae and Green Water

How to Use Algaecide in a Pool

How to use algaecide in a pool: the main types, when to add it relative to shock, how to dose and apply it, swimming safety and common mistakes.

On this page
  1. What algaecide does (and doesn’t do)
  2. Types of algaecide
  3. How to add algaecide step by step
  4. Before or after shock?
  5. Is it safe to swim after adding algaecide?
  6. What is the best algaecide for a swimming pool?
  7. Does chlorine kill algae?
  8. Does a copper pipe prevent algae?
  9. Common mistakes
  10. When algaecide isn’t enough

What algaecide does (and doesn’t do)

Algaecide is a chemical added to pool water to help control algae. Most pool professionals treat it as a supporting product. Chlorine is the main sanitizer, and algaecide is used as a preventive, as a boost after treating an outbreak, or for stubborn types of algae. Some products are marketed as able to kill existing algae, and some are mainly preventives. The label tells you which, and you shouldn’t expect it to fix a pool with poor circulation, an unbalanced pH or too little chlorine.

If the water is already green, brushing, shocking and filtering are the core of the fix. Our guide to cleaning a green pool walks through that process.

Types of algaecide

Active ingredients differ, and each has trade-offs:

  • Polyquat (polymeric quaternary ammonium). Often described as low-foaming and metal-free, which makes it a common choice for routine prevention. It is usually sold at strengths like “60%” for weekly or regular dosing.
  • Quaternary ammonium (“quats”). An older type that is typically cheaper, but it can cause foaming, particularly if overdosed.
  • Copper-based (including chelated copper). Often used for stubborn algae. Copper can stain pool surfaces or tint hair and water if levels build up, particularly in water that already contains metals, so use it carefully and follow the label.
  • Combination products. Some blend an algaecide with a clarifier or other ingredient. Check the label to see exactly what’s in them.
  • Specialty products. There are formulas for yellow (mustard) and black algae. They are covered in our guides on mustard algae and black algae.

How to add algaecide step by step

  1. Test and balance the water first. Check pH and alkalinity. A pH in the 7.2 to 7.6 range is the commonly cited target.
  2. Brush the pool. Scrub walls, floor, steps and corners so the product can reach the algae.
  3. Measure the dose. Use the label dose for your pool volume. If you aren’t sure of your volume, calculate it first. Don’t add extra “to be safe”, since overdosing can cause foam, cloudiness or staining.
  4. Run the pump. Keep the pump and filter on so the product mixes quickly.
  5. Pour it in. Pour slowly around the perimeter of the pool, or follow the label if it says to dilute first. Wear gloves and eye protection.
  6. Circulate. Let the pump run for several hours (labels commonly suggest 8 to 12) so it distributes fully.
  7. Clean up. Brush again, vacuum any dead algae and clean or backwash the filter once the water clears.

Before or after shock?

Many sources suggest shocking first and adding algaecide after chlorine has dropped to a moderate level (often cited as under roughly 5 ppm, or about a day later), because very high chlorine can break down some algaecides. Other products are made to be used with shock. The label for your particular product is the best guide. Never pour algaecide and shock into the pool at the same spot at the same time, and never mix chemicals together.

Is it safe to swim after adding algaecide?

It depends on the product. Many labels allow swimming after the product has circulated for a set period, and some say to wait longer. Check the label for your product, and don’t swim if you are unsure. Also check chlorine: if you have just shocked, swimming should wait until free chlorine has returned to the safe range as well. Anyone with sensitive skin or eyes, and parents of small children, should be especially conservative.

What is the best algaecide for a swimming pool?

There isn’t one best product. A reasonable approach:

  • For routine prevention in most pools, a polyquat-type algaecide is a common pick.
  • For vinyl, fiberglass or light-colored surfaces, be cautious with copper-based products because of staining risk.
  • For a stubborn type (yellow or black), use a product made for that algae.
  • Check that the product suits your pool type, and check whether it is compatible with your sanitizer system.

Does chlorine kill algae?

Yes. Chlorine at adequate levels is the primary way pools prevent and kill algae, and shocking is the standard response to a bloom. Algaecide supplements that. Chlorine may struggle when pH is high, when stabilizer (cyanuric acid) is high, or when the level drops during hot weather, which is why a pool can get algae even with some chlorine in it. If your pool stays green after shocking, see why your pool is green even after shocking.

Does a copper pipe prevent algae?

Copper ions can discourage algae, which is the idea behind copper ionizers and copper-based algaecides. A bare piece of copper pipe dropped in the water isn’t a controlled or reliable way to do this, though, and copper that builds up can stain surfaces and tint water. If you want copper-based algae control, use a product designed for pools and follow its instructions.

Common mistakes

  • Using algaecide instead of fixing the underlying problem. Poor circulation, low chlorine and a dirty filter will keep algae coming back.
  • Overdosing. More is not better. Excess can cause foam, haze or stains.
  • Mixing products. Add one chemical at a time, and don’t combine algaecides with shock or other chemicals in a bucket.
  • Ignoring the pH. Balanced water helps chlorine and algaecide do their job.
  • Skipping the brush. Algae sticks to surfaces, so brush first.

When algaecide isn’t enough

If algae keeps coming back, or you have black or mustard patches that return, you may need a deeper treatment. See chlorine washing and tile blasting for heavier surface cleaning, or consult a local pool professional.

The complete guide to algae and green water

How to Clean a Green Pool
Read the guide

Keep exploring

Guides from other topics

All topics →