Water Chemistry

Does shocking a pool raise pH?

It depends on the shock. Calcium hypochlorite and liquid chlorine tend to raise pH, dichlor is close to neutral and trichlor lowers it. Here is what to expect.

On this page
  1. The short answer
  2. Effect by shock type
  3. Why high chlorine can skew pH readings
  4. What to do after shocking

The short answer

Sometimes. Whether shocking raises pH depends on which product you use. Calcium hypochlorite and liquid chlorine tend to raise pH. Dichlor is close to neutral. Trichlor is acidic and tends to lower pH. Non-chlorine shock (potassium monopersulfate) has a small effect.

Effect by shock type

Shock type Typical effect on pool pH Other things to know
Calcium hypochlorite (cal-hypo) Raises pH noticeably Also adds calcium hardness
Liquid chlorine (sodium hypochlorite) Raises pH when added, then the effect usually fades No CYA, no calcium
Dichlor Close to neutral, small effect Adds cyanuric acid (CYA)
Trichlor Lowers pH and alkalinity Adds CYA, usually used as tablets, not for shocking
Non-chlorine shock (MPS) Small effect Does not raise chlorine, so it is not a replacement for sanitizing

Cal-hypo and liquid chlorine are basic products, which is why they push pH up as they dissolve. As chlorine is consumed in the water, much of that rise tends to settle back, so liquid chlorine’s long-term effect is often smaller than the first reading suggests. Actual results vary with your alkalinity, water volume and dose. A pool with plenty of alkalinity resists change, while one with low alkalinity shifts more.

Why high chlorine can skew pH readings

The most common drop-test pH reagent, phenol red, can be bleached by very high chlorine levels. This can give a false pH reading, so a test taken soon after shocking may not be trustworthy. Many kits offer a chlorine neutralizer step for this. Otherwise, wait until chlorine has dropped before you test pH and adjust.

What to do after shocking

  1. Test pH and total alkalinity before you shock, so you have a baseline. Correct pH first if it is far out of range. High pH weakens chlorine.
  2. Shock following the label and your target level. For doses, see how much chlorine to add to your pool.
  3. Wait until chlorine falls to a level where the test is reliable, then retest pH.
  4. Adjust in small steps. See how to raise and lower pool pH. If alkalinity rose too, see how to lower the alkalinity in your pool.

Related questions:

  • Will shocking raise pH and alkalinity? Cal-hypo and liquid chlorine can nudge both up, so test both.
  • Does shocking raise calcium hardness? Cal-hypo does. See calcium hardness.
  • Will shocking lower pH? Generally only trichlor-based products do.

Hazy water after shocking is common and often clears as the filter runs. If it persists, see why pool water goes cloudy.

The complete guide to water chemistry

Pool Water Chemistry for Beginners
Read the guide

Keep exploring

Guides from other topics

All topics →